Crimp Capping Machines
Products Crimp Capping Machines
|
|
Today, the company is well reckoned as one of the major Semi-Automatic Crimp Capping Machines Manufacturers and Suppliers in India. FS10 and FS32 are both semi-automatic Crimp Capping Machines designed for crimping aluminium overseals.
FS10 is designed for crimping 8 mm, 13 mm and 20 mm DIN standard crimp caps with or without flip-off plastic disc. FS32 is designed for 20 mm and 32 mm DIN caps, also with or without flip-off plastic disc. Custom crimp heads can be designed for special sizes of caps, pump action caps and the like. Both FS10 and FS32 employ Flexicon’s turbulence free crimp head. The crimp head generates an insignificant amount of particles in the crimping process and can thus be used in clean rooms.
FS tabletop capping machines are designed to be quick and easy to operate and in addition to protect the operator from repetitive strain injury (RSI). Crimping is performed by pressing the bottle or vial against the bottle grip. This causes the crimp head to move down onto the bottle, the jaws close around the cap, pressure is applied, the jaws release and the head lifts again. The FS machines deliver a consistent quality seal as well as long maintenance intervals. The crimp format can be changed in less than 2 minutes. FS tabletop capping machines are delivered with one format set. Additional crimp heads and bottle tools can be ordered, as can custom tools designed according to specification. A trained operator can crimp more than 1,000 units per hour.
|
Technical Specifications
| Mains | 110/230 VAC earthed, 50/60 Hz | | Power consumption | Max. 50 W | | Air supply | Clean and dry air at 6 bar
FS10: 35 l/min. free air
FS32: 50 l/min. free air
by crimping of 1,000 units/hour | | Closing head | Crimp type with hardened steel jaws and anodised aluminium housing. Each head crimps one cap size only. | | Cap sizes | FS10: 8-20 mm DIN standard with or without flip-top
FS32: 20-32 mm DIN standard with or without flip-top | | Bottle sizes | FS10: Diameter: 55 mm max. Height: 180 mm max.
FS32: Diameter: 95 mm max. Height: 240 mm max. | | Cabinet | Anodised aluminium | | Weight | FS10: 12 kg
FS32: 16 kg | | Ingress protection | IP31 | | Accessories | Crimp head, bottle tools, pockets, service parts kit, etc. |
Specifications
|
| |
|
|
PRODUCTS
